File formats#
Open and import#
| Format | Use | Notes |
|---|---|---|
.fkam |
FreazyKam project | Everything: shapes, tools, stock, operations |
.svg |
Drawing | Paths only. Convert text to outlines first |
.dxf |
Drawing | Asks for units if missing |
.stl |
3D model | Binary or ASCII |
.png .jpg .webp |
Depth map or photo | PNG preferred |
.gcode |
Program | For simulation |
.fkset |
Settings, tools or post-processors | Shows contents before importing |
.json |
Fusion 360 tool library | Imported into its own folder |
DXF#
| Supported | Not supported |
|---|---|
| LINE, LWPOLYLINE, ARC, CIRCLE, SPLINE, ELLIPSE | Blocks and proxy entities (explode first) |
Save and export#
| Format | Contains | Re-editable |
|---|---|---|
.fkam |
Whole project | Yes |
.gcode / .nc |
Machine program | No |
.svg |
Outlines in mm, stock as page | Outlines only |
.fkset |
Settings, tool folder or post-processor | — |
Fusion 360 import#
| Brought in | Notes |
|---|---|
| Type, Ø, flutes, flute length | Converted to mm |
| RPM, feed, plunge | Maker's starting values |
| Chip load | Becomes the rated chip load |
| Bull nose / bowl bits | Keep corner radius |
| V-bit Max Z | Worked out from the cone |
| Round-over bits | Skipped and listed |